FUJIKEN SAFETY（No.3/No.5）
Cut-off wheel for metal
Outstanding performance and easiness
Featurers
- FUJIKEN SAFETY can withstand a high operating speeds.
- FUJIKEN SAFETY is reinforced with a special glass-fiber in the middle of the wheel.
- FUJIKEN SAFETY provides an outstanding cutting effect and safety.
Applications
There are 2types, general metal and heavy weight metal depending on the type material to be cut.
- For general metal/No.3 pipe, angle, channel, stud, etc.
(good for comparatively small cutting sections) - For heavy weight metal/No.5 square metal, rod, etc.
(good for comparatively large cutting section)
Cut-off wheel for general metal/No.3
| DIAM×THICK×HOLE（mm) | INDICATION | MAX.SPEED | VOLUME/PACK | |
| ｍ/sec | m/min | |||
| 100×2.0×15(16) | A46S | 72 | 4,300 | 600｛(10×10)×6} |
| 125×2.0×22(20) | A46S | 72 | 4,300 | 200（10×20） |
| 150×2.0×22(20) | A46S | 72 | 4,300 | 100（10×10） |
| 180×2.0×22(20) | A46S | 72 | 4,300 | 100（10×10） |
| 205×2.0×22(20/25.4) | A46S | 72 | 4,300 | 100（10×10） |
| 255×2.5×25.4(22) | A46S | 72 | 4,300 | 25 |
| 305×2.5×25.4 | A36S | 72 | 4,300 | 25 |
| 355×3.0×25.4 | A36S | 72 | 4,300 | 25 |
| 405×3.0×25.4(30) | A30R | 63 | 3,800 | 25 |
| 455×3.5×25.4(30/32) | A30R | 63 | 3,800 | 20 |
Cut-off wheel for heavy weight metal/No.5
| DIAM×THICK×HOLE(mm) | INDICATION | MAX.SPEED | PACK/VOLUME | |
|---|---|---|---|---|
| m/sec | m/min | |||
| 355×3.0×25.4 | A36M | 72 | 4,300 | 25 |
| 405×3.0×25.4(30) | A30M | 63 | 3,800 | 25 |
| 455×3.5×25.4(30/32) | A30M | 63 | 3,800 | 20 |
Selection table
| MOTOR POWER | HIGH | Cut-off wheel for general metal/No.3 |
|---|---|---|
| LOW | Cut-off wheel for heavy weight metal/No.5 | |
| SHAPE OF THE MATERIAL | SECTION:SMALL | Cut-off wheel for general metal/No.3 |
| SECTION:LARGE | Cut-off wheel for heavy weight metal/No.5 | |
| QUALITY OF THE MATERIAL | SOFT | Cut-off wheel for general metal/No.3 |
| HARD | Cut-off wheel for heavy weight metal/No.5 |
Please ask our sales department for your order on nonstandard items, informing about the type and shape of material to be cut. Model of machine. Power and rotational speed of motor.
※Special dimensions are available on request.
